Digital cable channels
Digital cable is any type of cable television distribution using digital video compression for USE. The technology was originally developed by General Instrument before being acquired by Motorola and subsequently acquired by ARRIS Group. Cable companies converted to digital systems during the 2000s, around the time that television signals were converted to the digital HDTV format, which was not compatible with earlier analog cable systems. In addition to providing higher resolution HD video, digital cable systems provide expanded services such as pay-per-view programming, cable internet access and cable telephone services. Most digital cable signals are encrypted, which reduced the high incidence of cable theft which occurred in analog systems.
In 1990, General Instrument (now owned by ARRIS Group) demonstrated that it was possible to use digital compression to deliver high quality HDTV in a standard 6 MHz television channel. Using the same technology General Instrument (GI) demonstrated the digital transmission of multiple high quality standard definition programs in a 6 MHz cable channel.
In the 1990s cable providers began to invest heavily in this new multi-channel digital TV technology to expand the number of channels and services available to subscribers. Increased competition and programming choices from Direct-broadcast satellite services such as DirecTV, Dish Network, and PrimeStar caused cable providers to seek new ways to provide more programming. Customers were increasingly interested in more channels, pay-per-view programming, digital music services, and high speed internet services. By 2000, most cable providers in the US were offering some form of digital cable TV to their customers.
Digital cable technology has allowed cable providers to compress video channels so that they take up less frequency space and to offer various two-way communication capabilities. This has enabled digital cable providers to offer more channels, video on demand services (without use of a telephone line), telephone services, high speed internet services, and interactive television services. In addition, digital cable technology allows for error correction to ensure the quality of the received signal and uses a secure digital distribution system (i.e. a secure encrypted signal to prevent eavesdropping and theft of service.)
Most digital cable providers use QAM for video services and DOCSIS standards for data services. Some providers have also begun to roll out video services using IPTV or Switched video.
Digital cable technology can allow many TV channels to occupy the frequency space that would normally be occupied by a single analog cable TV channel. The number of channels placed on a single analog frequency depends on the compression used. Many cable providers are able to fit about 10 digital SD channels or 2 digital HD channels on a single analog channel frequency. Some providers are able to squeeze more channels onto a single frequency with higher compression, but often this can cause the video quality of the channel to degrade.
The subchannel is a logical channel of data within the physical channel. Technically there can be up to 1024 subchannels in a physical channel, though in practice only a few are used (as the bandwidth must be divided among all the subchannels).
There are two ways providers try to make this easier for consumers. The first, accomplished through PSIP, is where program and channel information is broadcast along with the video, allowing the consumer's decoder (set-top box or display) to automatically identify the many channels and subchannels.
The second (also accomplished through PSIP) is where, in an effort to hide subchannels entirely, many cable companies map virtual channel numbers to underlying physical and sub-channels. For example, a cable company might call channel 5-1 "channel 732" and channel 5-2 "channel 733". This also allows the cable company to change the frequency of a channel without changing what the customer sees as a channel number. In such arrangements, the physical/sub-channel numbers are called the "QAM channel", and the alternative channel designation is called the "mapped channel", "virtual channel", or simply "channel".
In theory, a set-top box can decode the PSIP information from every channel it receives and use that information to build the mapping between QAM channel and virtual channel. However, cable companies do not always reliably transmit PSIP information. Alternatively, CableCards receive the channel mapping and can communicate that to the set-top box.