Digital cable Tester

If you own a DSP-4000, you can upgrade to the DSP-4100 with the DSP-4100E Upgrade Kit. The kit contains instructions for contacting Fluke Networks to schedule your upgrade with an authorized Fluke Service Center. A technician will upgrade your DSP-4000 main and remote units and return them with a removable 16-MB memory card, PC reader for the card, Fluke's CableManager™ Software version 4.0 and a user manual Cat 6 Link AdaptersManufacturers' proprietary Cat 6 solutions are making testing a challenge, due to the need for tuned jack/plug combinations from the same manufacturer. Fluke Networks has solved this with its manufacturer-specific Link Interface Adapters. These optional adapters allow you to tailor your DSP-4100 for every installation, delivering unequaled link test accuracy. In the future, when Cat 6 connectors are industry standard, Fluke Networks will offer a standard Cat 6 Link Adapter for the DSP-4100 which will allow the testing of all Cat 6 links.
These optional adapters allow you to tailor your DSP-4000 for each installation and deliver unequaled link test accuracy. In the future, when a Cat 6 connector becomes industry standard, Fluke Networks will offer a standard Cat 6 Link Adapter for the DSP-4000 which will allow the testing of all Cat 6 links. Industry's first Permanent Link Solution guarantees superior performance and repeatability. The DSP-LIA101S Permanent Link Interface Adapter moves the baseline accuracy of Fluke Networks' DSP-4000 Series CableAnalyzers™ to the very end of the test adapter, delivering exceptional test results and standards compliance for field testing of twisted-pair cabling installations. Fluke Networks' Permanent Link Interface Adapter offers:
Do you know the weakest link between you and a PASS? Unknown to most installers, the tester's adapter interface cable may be the weakest link when testing. Conventional adapter cords, even high-quality adapter cables with shielded pairs, may be the cause for many false failures in the field. Susceptible to the daily wear and tear associated with rough field conditions, they degrade with time and contribute to Return Loss which is often the cause of a FAIL. False failures are costly, adding unnecessary hours of troubleshooting and repeat testing. For less than the cost of one failed link, Fluke Networks' Permanent Link Adapter boosts your PASS results time and again. New, proprietary technology ensures accuracy with time and money savings The new Permanent Link Interface Adapter design delivers superior accuracy and stability required for measuring Return Loss, while increasing the accuracy of all other measured test parameters. Moving the baseline accuracy of the DSP-4000 Digital CableAnalyzer™ to the end of the test adapter, the Permanent Link Adapter eliminates the effects contributing to FAIL results associated with conventional tester adapters. Your PASS is a real PASS. If you FAIL, you can be sure that it is not your tester or the adapter. Comply with standards to win more jobs Don't lose out on jobs that require your installations to be TIA/EIA-568-B compliant. Basic Link is out, Permanent Link is in. Rely on Fluke Networks to provide you with the technology and equipment to accurately reflect the quality of your work and to ensure that your results meet the proposed standards. You can now test the Permanent Link as defined by the proposed TIA/EIA-568-B with the highest level of accuracy, repeatability and confidence. Innovative Network SuperVision solutions™ |